aluminium blind rivets aluminium tile trim aluminium interior security shutters
|Product||aluminium blind rivets aluminium tile trim aluminium interior security shutters|
|Material||Alloy 6060, 6061, 6063, etc.|
|Color||Different colors available (black, blue, green, champagne, bronze, golden, vermillion, etc.)|
|Surface treatment||Mill finish, anodized, electrophoretic coating, powder coating, thermal break, wood grain/wood-in-shift, etc.|
|Mould||Based on your drawing or use our mould free|
|Sample time||Usual practice: within 15 working days against payment|
|Usages||Windows, doors, curtain wall, solar panel, LED panel, heat sink, industry, etc.|
|Certified||ISO9001-2008 Quality System,|
The characteristics of various series of aluminum profiles
1: The characteristics include aluminum 99.00%, the conductivity is good, the corrosion resistance is good, the welding performance is good, the strength is low, the non-heat treatment is strengthened. Application: high purity aluminum (99.9% of aluminum) is mainly used for scientific experiment, chemical industry and special purpose.
2: It is characterized by aluminum alloy with copper as the main element. Manganese, magnesium, lead and bismuth are also added for cutting. For example, in the process of smelting, you should pay attention to the safety of the metal. The 2014 alloy is very strong in the aerospace industry. The 2017 alloy is slightly lower than the 2014 alloy, but is easier to process. The heat treatment is enhanced in 2014. Disadvantages: the corrosion tendencies are severe. Application: aviation industry (2014 alloy), screw (2011 alloy) and high temperature (2017 alloy).
3: It is characterized by the aluminum alloy with the main alloy elements, non-heat treatment, corrosion resistance and good weldability. Good plasticity. (close to super aluminium alloy). Disadvantages: low intensity, but can be strengthened by cold-working hardening. When annealing, it is easy to produce coarse grain. Application range: the guide oil seamless tube (3003 alloy), the can (3004 alloy).
4: It is characterized by silicon, not commonly used. Heat treatment is enhanced, but some alloys are not heat-treated.
5: It is characterized by magnesium. The resistance can be good, the welding performance is good, the fatigue strength is good, not heat treatment is strengthened, only can the cold processing increases the intensity. Application range: the handle of the mower, the oil tank duct, the body armor.
6: It is characterized by magnesium and silicon. Mg2Si is the main reinforcement phase, currently the most widely used alloy. 6063. The most used, the other 6082, 6160, 6125, 6262, 6060, 6005, 6463. 6063, 6060, 6463 is less intense in the 6 series. 6262, 6005, 6082, 6061 is stronger in 6 lines. Characteristics: moderate strength, good corrosion resistance, good welding performance, good process performance (easily extruded forming) oxidation color performance is good. Application range: hand in power tools (e.g. car luggage, door, window, body, heat sink, compartment)
7: It is characterized by zinc, but sometimes a small amount of magnesium and copper is added. The super hard aluminum alloy is the hardness that contains zinc, lead, magnesium and copper alloy near the steel. The compression speed is slower than the 6 series alloy and the welding performance is good. The 7005 and 7075 are the highest levels of the 7 series, which can be strengthened by heat treatment. Range of applications: aviation (aircraft load bearing, landing gear), rockets, propellers, and aerospacecraft.
Corporate Introduction :
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hongying" brand. Strong comprehensive strength and excellent service make Yong long "Hongying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.
The company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.
Please tell us the information below, and we will give the best suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the correspondence mold.
3. Which color you want or tell us the architectural style you like.
4. Purchase quantity. It will convenient us to give you the best price.
Welcome to visit our company !
Choose us & contact us !
Contact Us at Any Time