|Material:||Aluminum Alloy 6063||Thickness:||0.8-5.0mm|
|Application:||Building And Construction,aluminum Window System Frame||Model Number:||YL-11129-1 Series|
thermal break aluminium profiles,
T6 Anodized Aluminum Profiles
The activation of aluminum, namely, removing the passivating oxide film and dispersing the metal, is known to sharply increase its reactivity. In particular, the activated aluminum readily reacts with water, and also with alcohols and other organic compounds. This state of aluminum opens wide opportunities for ap-plication the metal to various processes.
One among the promising ways of application of activated aluminum and its alloys is the environmen-tally friendly procedure for preparation of aluminum oxide substances used in production of catalysts and carriers.
This article treats the problem of activated alu-minum preparation and also application range of active aluminum chloride complexes synthesized from the activated aluminum.
The existing procedures for activating aluminum and its alloys can be tentativelydivided in two groups: chemical and physical methods.
The mercury salts are known to operate as pro-moters of the chemical dissolution of aluminum in nitric acid. Therewith the reaction rate depends not only on the concentrations of the mercury salts and of HNO3 and on the temperature, but also on the form and size of aluminum sample subjected to activation (powder, wire, or massive sample).
It was found in the study of aluminum samples of various geometric forms that at growing ratio surface/ volume of the sample the ratio of its dissolution rate to the surface reduced, and the ratio of the dissolution rate to the mass unit remained practically constant. Therefore in this case not only the superficial catalytic effect occurred related to the cyclic reduction.
Heat cut aluminum alloy is the abbreviation of heat insulation aluminum alloy for bridge breaking. Bridge breaking aluminum is also called heat insulation bridge breaking aluminum profile, heat insulation aluminum alloy type right material.
The two sides of the broken bridge aluminum are made of aluminum, and the middle part is made of plastic profile cavity, which can improve the water vapor tightness of doors and windows.
In terms of thermal insulation and sealing performance, the new type of bridge breaking energy-saving aluminum alloy window is leading the fashion.
Broken bridge aluminum alloy window is an improved type based on the old aluminum alloy window in order to improve the thermal insulation performance of doors and windows.
The principle of bridge breaking aluminum alloy window is to use PA66 nylon to separate and connect the two layers of aluminum alloy Indoor and outdoor.
Broken bridge aluminum alloy is a new type of thermal insulation aluminum profile, which can be divided into strip type and glue injection type according to the connection mode.
Advantages of Aluminum Frame:
Light yet strong, aluminum frame windows and patio doors can be configured into a wide variety of combinations. The narrowness of the frame places the focus on the glass and subsequently, the view it offers. Multi-panel glass walls are often made with aluminum frames to facilitate indoor/outdoor living. Milgard aluminum frames are available in anodized or baked-on finishes for long lasting color. Sealed, mechanically joined corners stay square and true over years of use.
Aluminum is not recommended in beach homes for while the material is water resistant, it can suffer corrosion from salt water and salt air. The corrosion affects hardware operation and frame performance.
Because aluminum conducts heat and cold well, Milgard offers a Thermally Improved Aluminum frame in select regions. Thermally Improved Aluminum windows and patio doors are equipped with thermal breaks to separate the interior and exterior surfaces and reduce heat transfer.
|Description||Blue Powder Coated Aluminium Profiles For Building Decoration Materials And Aluminum Windows And Doors Frame|
|Material Thickness(t)||0.8-2.0 mm|
|Materiral||aluminum alloy 6063|
|Color||blue,beige,green,white,black,yellow,red,etc, (RAL series)|
|Surface Treatment||powder coated, wood grain, polished and etc|
|Shape||Square, Round, Flat, Oval, and according to customer's drawing.|
|Length||Normal length=6m or in customer's order|
|Usage||Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc.|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
1. Compared with other commonly used metals, the density of aluminum profile Bai is smaller and lighter. The density of Du is only 2.70 g / cm3, which is 1 / 3 of copper or iron. In the process of using Zhi, the required bearing capacity is not considered at all.
2. In the production process, aluminum profiles are treated by two processes, hot and cold, which have strong corrosion resistance.
3. Aluminum profile has good ductility. It can be made into light alloy with many metal elements, with high quality.
4. Compared with other metal materials, aluminum mold has strong plasticity, good productivity and good advantages for production.
5. Aluminum profiles have good casting properties and can be processed into different shapes of aluminum profiles.
6. The surface treatment performance is good and the appearance color is bright.
7. The chemical property is stable, non-magnetic and can be recycled. It is a kind of benign and recyclable metal material.
8. Small elastic coefficient and no spark in collision and friction make the best performance in automobile technology.
9. It has good thermal conductivity and conductivity, and is outstanding in short distance transmission.
10. Compared with other metal materials, aluminum profiles have no metal pollution, no toxicity and no volatile metal on the surface oxide layer.
Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hong Ying" brand. Strong comprehensive strength and excellent service make Yong long "Hong Ying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.
Our company has 900 employees, including 120 high and intermediate engineering technology and management personnel.
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the correspondence mold.
3. Which color you want or tell us the architectural style you like.
4. Purchase quantity. It will convenient us to give you the best price.
Contact Person: Tina Guo