• Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips
  • Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips
  • Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips
  • Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips
Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips

Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips

Product Details:

Place of Origin: Gaungdong,China(mainland)
Brand Name: HONG YING
Certification: ISO9001:2000,ISO14001:2004
Model Number: Customize

Payment & Shipping Terms:

Minimum Order Quantity: Negotiable
Price: Negotiation
Packaging Details: protective film for each piece, then each bundle in Kraft paper.or according to customer request
Delivery Time: Within 15-25 days after receive deposit and moulds are passed.
Payment Terms: L/C, T/T, D/A, D/P, , MoneyGram
Supply Ability: 6000 tons per month
Get Best Price Contact Now

Detail Information

Material: 6063 6061Aluminum Alloy Thickness: 0.8-1.5mm
Temper: T3-T8 Finish: Mill Finish, Anodized, Powder Coating,Electrophoresis,etc
Color: Silver White,bronze,champagne,black,etc Payment: According To Theory Weight Or Actually Weight
Load: Around 13tons For 20GP And 25tons For 40HQ Application: Lighting,Decoration
High Light:

aluminum heat transfer plates

,

led strip aluminium profile

Product Description

Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips

 

Profile Detail:

 

Description Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light
Material Thickness(t) 1.0/1.1/1.2/1.4 mm
Materiral aluminum alloy 6063,6063A,6060,6061
Annealing Treatment T3-T8
Color Silver White ,Bronze , Champagne, Black, (RAL series)etc.
Surface Treatment anodized, powder coated, electrophoresis, wood grain, polished and etc
Shape Square, Round, Flat, Oval, and according to customer's drawing.
Length Normal length=6m or in customer's order
Usage Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc.
Package

1. Pearl cotton foam for each profile;

2. Wrap with shrink film exterior;

3. Packed according to customer request.

Advantages/Features

Providing colorful products with various mechanical

performances to adapt all kinds of architectural styles

 

Corporate Introduction:

 

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hong Ying" brand. Strong comprehensive strength and excellent service make Yong long "Hong Ying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.

The company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.

 

Corporate Advantages:

 

1.We specialized in design, manufacture, wholesale and retail Aluminum extrustion for sliding wardrobe, Aluminum Profile,Aluminum Frame,Rollers,and all fittings and accessories for sliding door. The Aluminum Extrusion Profile is with with different kinds of surface treatments,and all we have thousand of molds,we can set up new molds for you if we do not have the molds which you want.

2.Funiture aluminum profile, aluminum frame, aluminum product, anodized aluminum extrusion, aluminum extrusion profile for furniture and aluminum extrude profile

3.Surface: powder coating, anodizing, electrophoresis, mill finished, wooden coating and etc.

4.Our products are designed and developed to meet client requirement in terms of aesthetic appeal, durability and solve space constraint of corporate structure. Our modular products are available in designs and patterns as per the requirement from different clients.

 

Extrusion Process:

 

Process specification for oxidizing production of aluminium material

 

Oxidation process

 

1: The process parameters: the concentration of H2SO4 160-175 g/l, AL3+ < 20 g/l, current density 1-1.5A/dm, voltage 12-16V, oxidation tank temperature 18-22, according to the formulas to calculate the power on time. The film material 3-4 m provisions: silver white sand, 4-5 m, 7-9 m electrophoresis;

 

2: The anode frame shall be stably placed in the conductive seat and check and confirm that the contact between the profile and the cathode plate can be electrically oxidized;

 

3: Oxidation end, the anode rod hanging from the surface tilt, and drop the residual liquid, into the clean water tank cleaning for 2 minutes;

 

4: The non colored section can enter the two stage water tank to be treated with sealing hole.

 

Coloring process

 

1: Process parameters: SnSO4 5-6g/l; NiSO4 16-18 g/l; 9-12 g/l 17-20 stain free acid; g/l; pH =0.8-1.2, bath temperature of 19-21 DEG C, coloring voltage should be lower than the oxidation voltage 14-16V; usually add the following ratio: SnSO4:NiSO4=1:1; color additives: SnSO4=1:1

 

2: Coloring products only with a single row of double row rolling way, the corresponding width of the spacing between two adjacent products or products, generally with the finger test more than two finger width, tie line must be tight, solid bar can only use the new tie line;

 

3: When the coloring products are oxidized, the oxidation bath temperature must be controlled at 18-22 DEG C to ensure uniform film thickness and fine structure;

 

4: The coloring area of each row of the coloring products should be basically the same;

 

5: After coloring, the carrier is inclined and is cleaned with a color guide. After the conditions are met, the water will be washed again. Otherwise, the following conditions will be dealt with;

 

6: The color is shallow, back into the coloring trough, according to the complementary switch coloring time shall not exceed 2 minutes; deep color, should be put into the corresponding oxidation tank tank fade, or fade to the ideal air suspension so far; oxidation products must be approved by three or more washing before entering the coloring trough a final water washing tank, which was PH 5;

 

7: The coloring products prohibited in the sink after long-term immersion in oxidation, general soaking time should not exceed 3 minutes;

 

8: The product enters the coloring trough, should be without electricity, soak for 1 minutes or so, and then began to electrify coloring, coloring process began, about 30s in stably coloring voltage up to 14-18V, and then keep the voltage stable until finished coloring;

 

9: To avoid as much as possible in different batches of different varieties of products, products are colored in the same frame;

 

10: The coloring after two times washing before postprocessing, control PH value of the first water washing, PH = 2, PH = 5 second.

Process specification for oxidizing production of aluminium material

 

Oxidation process

 

1: The process parameters: the concentration of H2SO4 160-175 g/l, AL3+ < 20 g/l, current density 1-1.5A/dm, voltage 12-16V, oxidation tank temperature 18-22, according to the formulas to calculate the power on time. The film material 3-4 m provisions: silver white sand, 4-5 m, 7-9 m electrophoresis;

 

2: The anode frame shall be stably placed in the conductive seat and check and confirm that the contact between the profile and the cathode plate can be electrically oxidized;

 

3: Oxidation end, the anode rod hanging from the surface tilt, and drop the residual liquid, into the clean water tank cleaning for 2 minutes;

 

4: The non colored section can enter the two stage water tank to be treated with sealing hole.

 

Coloring process

 

1: Process parameters: SnSO4 5-6g/l; NiSO4 16-18 g/l; 9-12 g/l 17-20 stain free acid; g/l; pH =0.8-1.2, bath temperature of 19-21 DEG C, coloring voltage should be lower than the oxidation voltage 14-16V; usually add the following ratio: SnSO4:NiSO4=1:1; color additives: SnSO4=1:1

 

2: Coloring products only with a single row of double row rolling way, the corresponding width of the spacing between two adjacent products or products, generally with the finger test more than two finger width, tie line must be tight, solid bar can only use the new tie line;

 

3: When the coloring products are oxidized, the oxidation bath temperature must be controlled at 18-22 DEG C to ensure uniform film thickness and fine structure;

 

4: The coloring area of each row of the coloring products should be basically the same;

 

5: After coloring, the carrier is inclined and is cleaned with a color guide. After the conditions are met, the water will be washed again. Otherwise, the following conditions will be dealt with;

 

6: The color is shallow, back into the coloring trough, according to the complementary switch coloring time shall not exceed 2 minutes; deep color, should be put into the corresponding oxidation tank tank fade, or fade to the ideal air suspension so far; oxidation products must be approved by three or more washing before entering the coloring trough a final water washing tank, which was PH 5;

 

7: The coloring products prohibited in the sink after long-term immersion in oxidation, general soaking time should not exceed 3 minutes;

 

8: The product enters the coloring trough, should be without electricity, soak for 1 minutes or so, and then began to electrify coloring, coloring process began, about 30s in stably coloring voltage up to 14-18V, and then keep the voltage stable until finished coloring;

 

9: To avoid as much as possible in different batches of different varieties of products, products are colored in the same frame;

 

10: The coloring after two times washing before postprocessing, control PH value of the first water washing, PH = 2, PH = 5 second.

 

Photos:

Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips 0

 

 

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.

Want to Know more details about this product
I am interested in Customized 6061 T5 Aluminum Profiles Outdoor Led Stair Step Light For Led Strips could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.