0.8mm Thickness Aluminium Construction Profiles Porcelain Oxidation Custom Surface

Creative Porcelain Surface Aluminum Profiles For Building Decoration

Introduction of Porcelain Aluminum Profiles:

New surface porcelain swim production and porcelain swim itself performance
First, the production of high—end surface porcelain swinuning materials, exquisite production process:
1, the aluminum bar is required from the melted rod.
The extrusion speed is 49% slower than the conventional material,
3. The surface of the extruded blank is required to be high, no obvious mechanical lines, mold lines, geometric dimensions above high precision, and the plane clearance is controlled within 0.3% of sur high precision.
4. The surface requirements should not be scratched, and there should be a space between each material, arxl the operation should be handled gently.
5 strict production technology, high requirements for process temperature, tank liquid control and skilled operators in the production process

Two, porcelain swimming performance:
1. All the porcelain swimming products we produce can be used outdoors without fading.(More than 30 years outdoors)
2. Porcelain swimming material film layer: oxide film (8-14) plus matte paint film (8-17),

3, hardness is greater than smooth
electrophoresis, generally more than
4H
4 surface gloss: 9-14 Different surface
gloss is different.
5. Accelerated weathering test over 8000 hours (1 hour/1.5 days) and over 33 years
6, adhesion, boiling water:
not off
7, easy to clean the surface, dust with air blow clean, wipe
gently with a towel.
8. Appearance of porcelain swimming material: compared with traditional smooth electrophoresis, wear-resistant, soft appearance, no radiation and no glare, making people feel comfortable.
Iii. Quality and brand power:
1. Konuk surface treatment has strong RESEARCH and development technology,

2.Production team,from casting,extrusion,oxidation,finised proucts are more than 10 years of work and technical personnel.
3.The castingr rod must use its own pure aluminum ingot from the meltingr rod． 
4.The Iatest prouction technology, the world's first surface color of Lianjian.
5.Production of one color board color , multiple prouction of one color board color,no change.
6.Surface rubbing : a 6 meter long small material can be done without rubbing one.

Product Details:

Introduction of Electrophoresis:

Aluminum or aluminum alloy products are used as anodes in electrolyte solution, and the process of forming aluminum oxide film on the surface of the aluminum and aluminum alloy is called anodic oxidation treatment of aluminum and aluminum alloy. After anodization, the surface of aluminum can produce several microns - hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decoration have been obviously improved and improved.

- The aluminum oxide film is a porous membrane. Whether it is coloured or not, it must be closed before being put into use, so as to improve its corrosion resistance and weatherability. There are three kinds of treatment methods, namely, high temperature hydration reaction closed, inorganic salt closure and organic matter closure.

(1) High temperature water sealing.

This method utilizes the hydration reaction of aluminum oxide film and water to turn the amorphous membrane into a hydrated crystalline membrane.

The hydration reaction can be carried out at both normal and high temperatures, but at high temperatures, especially at the boiling point, the hydrated crystalline membrane is a very stable and irreversible crystalline film. Therefore, the most commonly used aluminum oxide film is treated by boiling water or steam treatment.

(2) Sealing of inorganic salts.

Inorganic salt method can improve the fastness of organic coloring dyes, so it is often used in chemical coloring.

(3) Organic sealing method.

This is the soaking, soaking or coating of the aluminum oxide film. Because of the high cost and the increase of the process flow, it is not easy to use, more or more of the two kinds of methods mentioned above, and the first kind of high temperature hydration is the mainstream.

Photos:

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.